16
www.df-models.com
When it approaches to the end, you can see the capacity
of the battery being charged or discharged. You can press
”INC”or”DEC” key to display result of each cycle.
DATA STORAGE PROGRAM
Store data
For your convenience, I-Peak 6 has a data storage and load program. It can store fi ve battery
data representing the respective specifi cations of batteries. You can call back the data when
charging or discharging without setting up the program again.
Select PROGRAM SELECT SAVE DATA from the main menu. Press “Start/Enter” key to make
values blink, and use ”INC”or”DEC” to set up the parameter.
Setting of the parameter in this screen will not affect the charge and discharge
process. They just represent the specifi cation of the battery. The following
screens will automatically be displayed matched with the battery type you
set up. The example is NiMH battery pack, including 12 cells, the capacity is
3000m Ah.
Set up the charge current in the manual mode, or current limit in the auto
mode. Press ”INC”and”DEC” key simultaneously to make the current fi eld
blink to switch the charge mode.
Set up the discharge current and fi nal voltage.
Set up the charge/ discharge sequence and cycle number.
Saving the data
PROGRAM SELECT
SAVE DATA
SAVE [01] NiMH
14.4V 3000mAh
NiMH CHARGE At*
CUR LIMIT 5.0A
NiMH DISCHARGE*
1.0A
11.0V
NiMH CYCLE *
DCHG>CHG 3
Start
Enter
<”DEC” “INC”>
<”DEC” “INC”>
-
+
<”DEC” “INC”>
-
+
<”DEC” “INC”>
-
+
<”DEC” “INC”>
Start
Enter
Data
number
Voltage
Capacity
Start
Enter > 3 sec
DCHG
1 1314mAh
CHG
1 1430mAh
Save ...
