15
www.df-models.com
But in the manual mode, it will charge with the current you set. You can make it blink in the cur-
rent fi eld and press ”INC”and”DEC” at the same time to switch mode.
NIMH
2.0A 7.42V
CHG
022:45 00890
Battery type
Charging current
Battery voltage
Elapsed time
Charged capacity
The screen shows the real-time status. Press “Batt type/Stop” key to end the program. The
sound will emitted to indicates the end of program.
Discharge of NiCd/NiMH battery
Set charge current on the left and the fi nal voltage on the right. Range of the charge current is
0.1-1.0A; range of fi nal voltage is 0.1-25.0V. Press “Start/Enter” key for more than 3 seconds to
start the program.
NIMH
DISCHARGE
1.0A 11.5V
The screen indicates the discharging state. You can press “Start/Enter” key to alter discharge
current. Press “Start/Enter” again to store the value. Press “Batt type/Stop” key to stop discharg-
ing. The emitted sound alerts the end of discharging.
NIMH
1.0A 7.42V
CHG
022:45 00890
Battery type
Battery voltage
Elapsed time
Discharged capacity
Discharge current
Charge/discharge and discharge/charge cycle of NiCd/NiMH battery
You can set up sequence on the left and the number of cycles on the right. You can balance,
refresh and break-in the battery with this function .You can set a temporary cool-off procedure in
the user’s setting. Range of the cycle number is 1-5.
Press “Batt type/Stop” key to stop program, you can press
Start/Enter” key to alter charge current. The sound indicates
the end of program.
NIMH
CYCLE
DCHG>CHG 3
NIMH
1.0A 7.42V
D>C
022:45 00890
Battery type
Elapsed time
Battery voltage
Supplied capacity
Discharge or charge current
