DEZEGA CARBO, Руководство пользователя

Страница: 19 / 28

DEZEGA SKTB.02.СК5.00.00.000 РЭ-01
19
Daily inspection at the end of the working shift includes cleaning
the self-rescuer from coal dust, visual inspection the integrity
of the case and lids, as well as the integrity of all external
components and parts.
CAUTION!
Check the presence of fixators and belt loops. If they are not in the extreme position,
insert them against the end point. If the fixator or belt loop is missing, it is necessary to
install a new one.
Periodic inspection of the individual self-rescuers should be performed
once per 3 months, and for SCSRs, stored at changeover stations
along the escape routes – every 6 months.
The periodic inspection includes:
• visual check the integrity of the case and covers, inspection the integrity
of the fixators, belt loops, as well as all external components and parts;
• leaktightness check of the self-rescuers using CARBOFit-400 testing
device or similar device with an excessive pneumatic pressure
of 4,9±0,2 kPa. SCSRs are leaktight and suitable for using if pressure
drop in the chamber of the leak testing device is lower than 400 Pa
within 60 s.
DANGER!
SCSRs which did not pass the leak test, shall be immediately withdrawn from service,
placed in a tightly closed individual plastic bag and sent to the nearest authorized
service centre or to the nearest authorized representative for making decision about its
further using.
The routine (small) repair of self-rescuers is allowed directly at
the mine. Routine repair includes: replacement of the front and
rear bumper, belt loops and fixators, replacement of pictograms
and reflective labels.
In case of damage the pictograms with the self-rescuer donning procedure,
it is recommended to replace these pictograms.
It is recommended to keep record of the dates and results of periodic
inspections and the routine (small) repairs of each self-rescuer in the
lamp room within their service life.
Service life of self-rescuers is guaranteed only in the case of regular
technical inspections and maintenance.