- 24 -
Pic7.7 Connect terminal to inverter
When the connection is completed, the following steps should be referenced to use this
function:
1.Turn on the AC switch
2. Turn on the DC switch , Waiting inverter LCD lighting up
3.Press Enter button on the LCD panel in the main interface into the menu options, select
[parameter setting] to Enter setup submenu, and then select [running parameters] as
shown in figure 7.8,at this time please Input the default password 1234 through pressing
the button [up down, confirm], enter the operation parameter setting interface, Shown as
figure:
7.3 Use of anti-backflow function
