2.3 Notes for using
1. Inverter should be installed and maintained by qualified person under local standard
regulations.
2. It must disconnect the AC side first, then disconnect DC side before doing installation
and maintenance, after disconnecting, please wait at least 5 mins to avoid get shocked.
3. Local temperature of the inverter may exceed 80 ℃ while under operating.Do not
touch to avoid get injured.
4. All electrical installation must accord with local electrical standards, and after obtaining
the permission of the local power supply department, the professionals can connect the
inverter to the grid.
5. Please take appropriate anti-static measure.
6. Please install where children can not touch.
The three phase string power inverter is designed and tested under related safety regulations.
It can ensure the personal safety of the user. But as an electric device, it may cause shock or
injury by incorrect operation. Please operate the unit under below requirements:
Shock Hazard：
When PV module is exposed to sunlight, The output will generate
DC voltage.Prohibit touching to avoid shock hazard.
Shock Hazard：
After disconnecting the input and output of the inverter,it takes at
least 5 minutes for the inverter to completely release the residual
energy and wait for at least 5 minutes before it can be overhauled.
High Temperature Hazard：
Inverter’s local temperature may exceed 80℃ while under
operating. Please do not touch the inverter’s surface.
- 04 -
