- 23 -
Pic7.5
Waterproof terminal
Pic7.6
Connect limiter to inverter
1
2
limiter
+ -
1
2
Pic7.3
Clamp Senor
Pic7.4
Clamp Senor internal arrow
(3)After you finish the installation in process 1 and 2, connect the N line (N) to the N
terminal of the limiter and tighten the line.
(4)Connect the control line. There are two numbers 1 and 2 on the interface of limiter,
and the same on the waterproof terminal of the inverter. Twist the waterproof terminal
and connect the red line to number 1 and black line to number 2 shown as the picture.
After that connect the terminal to the interface of the limiter. The other side of the line
should be connected to the control terminal.
L
K
