Dexter Laundry OPL 30 Cycle 200G Express Скачать руководство пользователя страница 4

Страница: 4 / 71

Children should be supervised to

ensure they do not operate or play

in or around equipment.

Keep all panels in place to protect against electrical

shock and injury and add rigidity to washer.

WARNING

This appliance is not intended for use by persons (including

children) with reduced physical, sensory or mental capabilities, or

lack of experience and knowledge, unless they have been given

supervision or instruction concerning use of the appliance by a

person responsible for their safety

A washer should not be allowed to operate if any of the following occur:

•

Excessive high water level.

•

Machine is not connected to a properly earthed circuit.

•

Door does not remain securely locked during the entire cycle.

•

Vibration or shaking from an inadequate mounting or foundation

Warning! Do not operate equipment if door glass is

damaged in any way.

Warning! Keep clear of rotating parts.

Prohibited! Do not enter this equipment or space.

Prohibited! Do not step or stand on this equip-

ment.

Prohibited! Do not operate without all guards and

covers in place.

Prohibited! Do not operate without all guards and

covers in place.

Prohibited! Do not wash clothing impregnated

with flammable liquids (petrochemical).

Prohibited! Do not allow children to play in or

around equipment.

Part # 8533-096-001 11/16

Содержание OPL 30 Cycle 200G Express








































































Результаты поиска

Содержание OPL 30 Cycle 200G Express

Отзывы:

Похожие инструкции для OPL 30 Cycle 200G Express

Бренды по названию

Популярные бренды

Dexter Laundry OPL 30 Cycle 200G Express, Руководство по запчастям и обслуживанию

Результаты поиска

Содержание OPL 30 Cycle 200G Express

Отзывы:

Похожие инструкции для OPL 30 Cycle 200G Express

Бренды по названию

Популярные бренды