DEXAPLAN DV 622 Скачать руководство пользователя страница 6

Страница: 6 / 22

Page 6

12.2 Setting mode

Settings such as date and time can be made in this
mode.

12.3 Recording mode

The  camera  image  is  monitored  by  the  internal
software in this mode. If changes in the live image are
detected,  the  images  or  the  video  sequences  are
recorded  with  date  and  time  on  the  inserted  SD
memory card. Movement detection must be activated
for this.
The  event  recorder  has  an  internal  memory  with  a
very  small  capacity  which  is  used  for  test  purposes.
The  internal  memory  is  used  automatically  if  no  SD
memory  card  has  been  inserted.  The  images
recorded in the internal memory cannot be transferred
to the SD memory card nor vice versa. If the SD card
is inserted after a recording on the internal memory,
only the images stored on the SD card can be viewed.
The  images  can  be  recorded  either  as  a  still  image
(still image mode) in JPG format with a resolution of
640 x 480 at a maximum rate of 1 image per second
or  as  a  video  sequence  (video  mode)  in AVI  format
(approx. 5 frames per second) with a resolution of 320
x 240. One 10 second sequence per image change is
recorded in video mode.
The images are automatically stored in directories by
date to make searching easier.
The images are stored in a ring memory system, i.e.
the oldest images are automatically overwritten if the
SD card is full. Individual images and directories can
also be deleted using the event recorder or a PC.

12.4 Playback mode

In this mode, you can view the stored images on a TV
or  a  video  monitor.  Alternatively,  you  can  view  the
images stored on the SD card on a monitor connected
to  a  PC.  Viewing  the  images  on  a  digital  camera  or
outputting  them  directly    to  a  photo  printer  is  not
possible.

13. Live image mode

After switching on, the device is automatically in still
image mode with the recording function activated (factory
setting).
The date and time are displayed on the top right of the

Connect either:

the free plug of the video output cable to the AV
(cinch) video input of a video monitor or television;

or connect the free plug of the video output cable
to the yellow “VIDEO” socket of the SCART
adapter. Plug the SCART adapter into the SCART
connection of your television.

The connection to a television or a video monitor is not
required during recording, however it is necessary for the
basic configuration.

10. Mounting the camera

You can align the camera as desired using the arm of the
bracket which you can rotate by 360° and by turning and
swivelling the ball joint (see Fig. D).

Wall / ceiling mounting of the camera

If the cable [30] is laid under plaster, the cable opening
[28: opening in wall for cable, Ø approx. 10 mm due to
plug] can be hidden behind the bracket (see Fig. E).

Fix the bracket [29] in the desired position using the
supplied screws [27] and wall plugs [26] (hole spacing
approx. 27 mm, drilling depth approx. 25 mm).

Installing the camera

The camera bracket also serves as a stand (see Fig. D).
You can stand the camera on, for example, a shelf.
Note: When using the bracket as a stand, ensure that the
camera is stable and cannot fall over. If necessary fix with
self adhesive tape.

11. Operation

In order to avoid damage to and malfunctioning of the
device, do not connect to the mains until all the
installation work is completed.

Slide the SD memory card [25] into the SD memory
card slot [18].

Plug the power supply [19] into a mains power socket
(230 V AC ~) .

Switch on the TV (or the monitor).

Set the TV to the corresponding AV input.

Switch on the ON / OFF switch [14] on the event
recorder (LED [7] lights). The camera image can
be seen on the screen after a few seconds.

12.Function modes of the event

recorder

The event recorder has four function modes:

12.1 Live image mode

If a TV or a video monitor is connected, the live image
of the connected camera will be displayed.