11
GB/IE
After you have replaced the batteries you can operate the
compact alarm system with the factory-setting 11 for the
user code only. Change the user code as described above.
The control unit gives a warning as soon as the current from the
batteries becomes too weak. At intervals of approx. 20 seconds
the control unit emits a pip sound and the LED
E
flashes.
In this event replace all the batteries with new ones 1. V
type LR6 (mignon / AA, alkaline). Otherwise false alarms may
be triggered.
Reset function
After you have replaced the batteries you can operate the
compact alarm system with the factory-setting 11 for the
user code only. Change the user code as described above.
Troubleshooting
Fault
Cause
Remedy
The compact
alarm system
does not
work or is
not working
properly.
The batteries
have run out.
Replace the old
batteries with
new ones.
The alarm is
triggered
without any
attempt to
break in.
The movement
detector responds
to animals or
warmth emitted
by objects (e.g.
heaters).
Keep animals out
of the sensing
range of the
movement detec-
tor and / or remove
the cause of tem-
perature emitted
by objects.
Fault
Cause
Remedy
It is not pos-
sible to enter
the user code
correctly.
You do not have
the user code.
Carry out the reset
function and then
set a new user
code.
The compact
alarm system
does not re-
spond to the
user code.
External influ-
ences have ad-
versely affected
the settings.
Carry out the reset
function and then
set a new user
code.
Maintenance and cleaning
o
Make sure that the compact alarm system is deactivated
before carrying out maintenance and cleaning work.
o
Check the technical safety and operation of the device
on a regular basis.
o
Remove the batteries during long periods of non - use.
o
Use a fluff-free cloth and a mild agent (no solvents) to
clean the plastic surfaces.
Disposal
Dispose of packaging materials, exhausted batteries and worn
out devices at a local authority approved disposal facility.
In accordance with European Directive 2002 / 96 / EC (cover-
ing waste electrical and electronic equipment) and its trans-
position into national legislation, worn out electrical devices
must be collected separately and taken for environmentally
compatible recycling. Take out the batteries before you dispose
of electrical devices. As the end user you have a duty to
recycle or properly dispose of your used batteries. Batteries
must not be disposed of with the household refuse.
Operation / Troubleshooting / Maintenance and cleaning / Disposal
KOE358_GB_IE_FI_SE_NO_Content_6111 11
24.10.2006 11:16:19 Uhr
