Page 7
Printing version 2.6
•JUL2017
Safety instructions for all DEWESoft systems
•
The DEWESoft data acquisition systems may only be installed by experts.
•
Read your manual before operating the system.
•
Observe local laws when using the instrument.
•
Ground the equipment: For Safety Class 1 equipment (equipment having a
protective earth terminal), a non interruptible safety earth ground must be
provided from the mains power source to the product input wiring terminals
or supplied power cable.
•
DO NOT operate the product in an explosive atmosphere or in the presence
of flammable gases or fumes.
•
DO NOT operate damaged equipment: Whenever it is possible that the
safety protection features built into this product have been impaired, either
through physical damage, excessive moisture, or any other reason,
REMOVE POWER and do not use the product until safe operation can be
verified by service-trained personnel. If necessary, return the product to
DEWESoft sales and service office for service and repair to ensure that
safety features are maintained.
•
Keep away from live circuits: Operating personnel must not remove
equipment covers or shields. Procedures involving the removal of covers or
shields are for use by service-trained personnel only. Under certain
conditions, dangerous voltages may exist even with the equipment switched
off. To avoid dangerous electrical shock, DO NOT perform procedures
involving cover or shield removal unless you are qualified to do so.
•
No modifications are allowed at the instrument. The fuse in the power
module has to be replaced by the same type. For continued protection
against fire, replace the line fuse(s) only with fuse(s) of the same voltage
and current rating and type. DO NOT use repaired fuses or short-circuited
fuse holder labels and print on the power module may not be removed.
•
DO NOT service or adjust alone. Do not attempt internal service or
adjustment unless another person, capable of rendering first aid and
resuscitation, is present.