DeWalt DW717XPS, Оригинальное руководство пользователя

Страница: 12 / 24

10
English
English (original instructions)
MITRE SAW DW717XPS
Congratulations!
You have chosen a D
e
WALT tool. Years of experience, thorough
product development and innovation make D
e
WALT one of the
most reliable partners for professional power tool users.
Technical Data
DW717XPS
Voltage V
DC
230
230/115
(U.K. & Ireland only)
V
Type 5
Power input W 1675
Blade diameter mm 250
Blade bore mm 30
Blade body thickness mm 2.2
Max. blade speed min -1 4000
Max. cross-cut capacity 90°/90° mm 98 x 320
Max. mitre capacity 45° mm 226
Max. depth of cut 90° mm 89
Max. depth of bevel cross-cut 45° mm 56
Mitre (max. positions) left
right
60°
51°
Bevel (max. positions) left
right
48°
48°
0° mitre
Resulting width at max. height 89 mm
Resulting height at max. width 320 mm
mm
mm 302
76
45° mitre left
Resulting width at max. height 89 mm
Resulting height at max. width 226 mm
mm
mm 213
76
45° bevel left
Resulting width at max. height 58 mm
Resulting height at max. width 320 mm
mm
mm 302
50
45° bevel right
Resulting width at max. height 30 mm
Resulting height at max. width 320 mm
mm
mm 302
22
31.62° mitre, 33.85° bevel
Resulting height at max. width 272 mm
mm 44
Blade run-down time s < 10.0
Weight kg 24
Noise values and vibration values (triax vector sum)
according to EN61029:
L
PA
(emission sound pressure level)
dB(A) 91
L
WA
(sound power level) dB(A) 99
K (uncertainty for the given sound level) dB(A) 3.0
Vibration emission value a
h
= m/s
2
2.1
Uncertainty K = m/s 2 1.5
The vibration emission level given in this information sheet has
been measured in accordance with a standardised test given in
EN61029 and may be used to compare one tool with another. It
may be used for a preliminary assessment of exposure.
WARNING:
The declared vibration emission level
represents the main applications of the tool. However
if the tool is used for different applications, with
different accessories or poorly maintained, the vibration
emission may differ. This may significantly increase the
exposure level over the total working period.
An estimation of the level of exposure to vibration
should also take into account the times when the tool
is switched off or when it is running but not actually
doing the job. This may significantly reduce the
exposure level over the total working period.
Identify additional safety measures to protect the
operator from the effects of vibration such as: maintain
the tool and the accessories, keep the hands warm,
organisation of work patterns.
Fuses:
Europe
230 V tools 10 Amperes,
mains
U.K. & Ireland
230 V tools 13 Amperes, in
plugs
NOTE: This device is intended for the connection to a power
supply system with maximum permissible system impedance
Zmax of 0.27 Ω Ohm at the interface point (power service box) of
user’s supply.
The user has to ensure that this device is connected only to a
power system which fulfils the requirement above. If necessary,
the user can ask the public power supply company for the
system impedance at the interface point.
Definitions: Safety Guidelines
The definitions below describe the level of severity for each
signal word. Please read the manual and pay attention to these
symbols.
DANGER:
Indicates an imminently hazardous situation
which, if not avoided,
will
result in
death or serious
injury .
WARNING:
Indicates a potentially hazardous situation
which, if not avoided, could result in death or
serious injury .
CAUTION:
Indicates a potentially hazardous situation
which, if not avoided, may result in minor or
moderate injury .
NOTICE: Indicates a practice not related to
personal injury which, if not avoided, may result in
property damage .
Denotes risk of electric shock.
Denotes risk of fire.
EC-Declaration of Conformity
MITRE SAW
DW717XPS
D
e
WALT declares that these products described under
Technical Data are in compliance with: