background image

English

7

The DCB118 charger is equipped with an internal fan 
designed to cool the battery pack. The fan will turn on 
automatically when the battery pack needs to be cooled.
Never operate the charger if the fan does not operate 
properly or if ventilation slots are blocked. Do not permit 
foreign objects to enter the interior of the charger.

Electronic Protection System

Li-Ion tools are designed with an Electronic Protection 
System that will protect the battery pack against 
overloading, overheating or deep discharge.
The tool will automatically turn off if the Electronic 
Protection System engages. If this occurs, place the lithium-
ion battery pack on the charger until it is fully charged.

Wall Mounting

DCB107, DCB112, DCB113, DCB115, DCB118, DCB132

These chargers are designed to be wall mountable or to 
sit upright on a table or work surface.  If wall mounting, 
locate the charger within reach of an electrical outlet, 
and away from a corner or other obstructions which may 
impede air flow. Use the back of the charger as a template 
for the location of the mounting screws on the wall. Mount 
the charger securely using drywall screws (purchased 
separately) at least 1" (25.4  mm) long, with a screw head 
diameter of 0.28–0.35" (7–9 mm), screwed into wood to an 
optimal depth leaving approximately 7/32" (5.5 mm) of the 
screw exposed. Align the slots on the back of the charger 
with the exposed screws and fully engage them in the slots..

Charger Cleaning Instructions

DCB107, DCB112, DCB113, DCB115, DCB118, DCB132

 

WARNING: 

Shock hazard. Disconnect the charger 

from the AC outlet before cleaning. Dirt and grease 
may be removed from the exterior of the charger using 
a cloth or soft non-metallic brush. Do not use water or 
any cleaning solutions.

Important Charging Notes

1.  Longest life and best performance can be obtained if 

the battery pack is charged when the air temperature is 
between 65 °F and 75 °F (18 ° – 24 °C). DO NOT charge 
the battery pack in an air temperature below +40 °F 
(+4.5 °C), or above +104 °F (+40 °C). This is important 
and will prevent serious damage to the battery pack.

2.  The area light/charger and battery pack may become 

warm to the touch while charging. This is a normal 
condition, and does not indicate a problem. To 
facilitate the cooling of the battery pack after use, 
avoid placing the area light/charger or battery pack 
in a warm environment such as in a metal shed or an 
uninsulated trailer.

3.  If the battery pack does not charge properly:

a.  Check operation of receptacle by plugging in a lamp 

or other appliance;

b.  Check to see if receptacle is connected to a light 

switch which turns power off when you turn out 
the lights;

c.  Move the area light/charger and battery pack to a 

location where the surrounding air temperature is 
approximately 65 °F – 75 °F (18 ° – 24 °C);

d.  If charging problems persist, take the area light/

charger and battery pack to your local service center.

4.  The battery pack should be recharged when it fails to 

produce sufficient power on jobs which were easily 
done previously. DO NOT CONTINUE to use under these 
conditions. Follow the charging procedure. You may 
also charge a partially used pack whenever you desire 
with no adverse effect on the battery pack.

5.  Foreign materials of a conductive nature such as, but 

not limited to, grinding dust, metal chips, steel wool, 
aluminum foil, or any buildup of metallic particles 
should be kept away from area light/charger cavities. 
Unplug the area light/charger before attempting 
to clean.

6.  Do not freeze or immerse the area light/charger in water 

or any other liquid.

 

WARNING:

 Shock hazard. Don’t allow any liquid 

to get inside the area light/charger. Electric shock 
may result. 

 

WARNING:

 Burn hazard. Do not submerge the 

battery pack in any liquid or allow any liquid to 
enter the battery pack. Never attempt to open the 
battery pack for any reason. If the plastic housing of 
the battery pack breaks or cracks, return to a service 
center for recycling.

Storage Recommendations

1.  Store the area light/charger indoors.
2.  The best storage place is one that is cool and dry, away 

from direct sunlight and excess heat or cold.

3.  For long storage, it is recommended to store a fully 

charged battery pack in a cool dry place out of the area 
light/charger for optimal results.

nOTE:

 Battery packs should not be stored completely 

depleted of charge. The battery pack will need to be 
recharged before use.

SAVE THESE INSTRUCTIONS FOR 

FUTURE USE

COMPONENTS (FIG. A)

 

WARNING: 

Never modify the power tool or any part 

of it. Damage or personal injury could result.

Refer to Figure A at the beginning of this manual for a 
complete list of components.

INTENDED USE

This area light is designed for professional workspace 
lighting and charging 

D

e

WALT

 20V Max* and Flexvolt™ 

rechargeable batteries.

DO nOT 

use in presence of flammable liquids or gases.

DO nOT

 let children come into contact with the tool. 

Supervision is required when inexperienced operators use 
this tool.

Содержание DCL070T1











Отзывы: