background image

English

9

maximum brightness. Press and hold the brightness down 
button 

 4 

 to go directly to minimum brightness.

Pressing the brightness up button 

 3 

 while at maximum 

brightness will go directly to minimum brightness.
Pressing the brightness down button 

 4 

 while at minimum 

brightness will go directly to maximum brightness.

Light Direction

To turn the left half of the light on or off, press the left light 
on/off button 

 5 

. To turn the right half of the light on or off, 

press the right light on/off button 

 6 

.

Low Battery Indicator

As the battery nears a fully discharged state, the light will 
blink twice and then dim, dropping the brightness of the 
light below the normal level. The light will continue to blink 
twice every 45 seconds until the battery is fully discharged 
at which time the light will turn off. Indication time will vary 
based on battery pack capacity.

 

WARNING:

 Stop work and replace the battery or 

connect the area light to AC when this occurs.

AC Outlet/AC Plug (Fig. A)

An extension cord can be plugged into the AC plug 

 9 

 

then into a wall outlet to power the area light and charge 
the battery. An AC outlet is available to connect extension 
cords to additional lights or for powering additional tools or 
appliances.

nOTE:

 The AC outlet cannot be controlled by the Tool 

Connect™ app.

 

WARNING:

 Do not connect devices drawing more 

than 10 amps.

 

WARNING:

 Do not connect more than 4 area 

lights together.

 

CAUTION:

 The area light's AC outlet is "live" when 

the area light is plugged into a wall outlet. The AC 
outlet is not controlled by buttons or by the Tool 
Connect™ app.

Securing the Area Light

Two security tabs 

 10 

 are available on the base of the area 

light to lock it with a chain or to keep multiple area lights 
secured together.

Moving the Area Light

Two handles 

 12 

 are provided for safely carrying your area 

light. The feet 

 11 

 on the area light can accommodate four 

standard 3" (76 mm) diameter casters with 3/8-16 UNC 
threaded studs (1-3/4" [45 mm] maximum stud length) with 
a minimum 100 lb weight capacity. At least one caster must 
be of a locking type. Accessory 

D

e

WALT

 casters are available 

on www.dewalt.com.

MAINTENANCE

 

WARNING: To reduce the risk of serious personal 
injury, turn area light/charger off, remove 
battery pack and disconnect from the AC outlet 
before making any adjustments, removing/

installing attachments or accessories, and 
before cleaning.

Cleaning

 

WARNING:

 Blow dirt and dust out of all air vents with 

clean, dry air at least once a week. To minimize the risk 
of eye injury, always wear ANSI Z87.1 approved eye 
protection when performing this.

 

WARNING:

 Never use solvents or other harsh 

chemicals for cleaning the non-metallic parts of 
the tool. These chemicals may weaken the plastic 
materials used in these parts. Use a cloth dampened 
only with water and mild soap. Do not clean this area 
light with a water spray or the like; never immerse any 
part of the area light in a liquid.

Accessories

 

WARNING: 

Since accessories, other than those 

offered by 

D

e

WALT

, have not been tested with this 

product, use of such accessories with this tool could be 
hazardous. To reduce the risk of injury, only 

D

e

WALT

 

recommended accessories should be used with 
this product.

Recommended accessories for use with your tool 
are available at extra cost from your local dealer or 
authorized service center. If you need assistance in 
locating any accessory, please contact 

D

e

WALT

 Industrial 

Tool Co., 701 East Joppa Road, Towson, MD 21286, call 
1-800-4-

D

e

WALT

 (1-800-433-9258) or visit our website: 

www.dewalt.com.

Repairs

The battery pack is not serviceable.

 

WARNING: 

To assure product SAFETY and 

RELIABILITY, repairs, maintenance and adjustment 
(including brush inspection and replacement) should 
be performed by a 

D

e

WALT

 factory service center 

or a 

D

e

WALT

 authorized service center. Always use 

identical replacement parts.

Register Online

Thank you for your purchase. Register your product now for:
• 

WARRAnTY sERViCE:

 Registering your product will 

help you obtain more efficient warranty service in case 
there is a problem with your product.

• 

COnFiRMATiOn OF OWnERshiP:

 In case of 

an insurance loss, such as fire, flood or theft, your 
registration of ownership will serve as your proof 
of purchase.

• 

FOR YOUR sAFETY: 

Registering your product will 

allow us to contact you in the unlikely event a safety 
notification is required under the Federal Consumer 
Safety Act.

Register online at www.dewalt.com/register.

Three Year Limited Warranty

D

e

WALT

 will repair, without charge, any defects due to 

faulty materials or workmanship for three years from the 
date of purchase. This warranty does not cover part failure 

Содержание DCL070T1











Отзывы: