background image

English

8

OPERATION

 

WARNING: To reduce the risk of serious personal 
injury, turn light off, remove battery pack and 
disconnect from the AC outlet before making any 
adjustments, removing/installing attachments 
or accessories, and before cleaning.

 

WARNING: Do not cover the lens during 
operation.

Installing and Removing Battery Packs 
(Fig. D)

1.  To install the battery pack 

 17 

 into the area light/

charger, lift the battery compartment door 

 14 

, align the 

battery pack with the rails inside the area light's battery 
compartment 

 19 

 and slide it in until the battery pack 

is firmly seated. Ensure that it does not disengage, then 
close the door.

2.  To remove the battery pack from the area light/charger, 

press the release button 

 18 

 on the battery pack and 

firmly pull the battery pack out. 

Charging a Battery in the Area Light/
Charger (Fig. D)

1.  Attach an extension cord to the area light, then plug 

the area light/charger into an appropriate outlet before 
inserting battery pack.  

nOTE:

 The area light/charger will not charge a battery 

unless the light is plugged into an AC outlet.

2.  To install the battery pack, refer to 

Installing and 

Removing Battery Packs. 

Fig. D

14

17

18

19

3.  The red (charging) indicator light (

 15 

, Fig. A) will blink 

continuously indicating that the charging process 
has started.

4.  The completion of charge will be indicated by the red 

(charging) indicator light remaining ON continuously. 
The battery pack is fully charged and may be used at 
this time or left in the area light/charger. 

nOTE: 

To ensure maximum performance and life of lithium-

ion battery packs, charge the battery pack fully before 
first use.

D

e

WALT Tool Connect™

This area light is capable of connecting with mobile 
devices that support Bluetooth® Smart (or Bluetooth® 4.0) 

technology. (To see if your mobile device is compatible, 
visit: 

http://www.bluetooth.com/Pages/Bluetooth-Smart-

Devices-List.aspx)

D

e

WALT

 Tool Connect™ is an optional application for your 

smart device (such as a smart phone or tablet) that can 
connect and control your area light.

nOTE: 

The Bluetooth® word mark and logos are registered 

trademarks owned by the Bluetooth®, SIG, Inc. and any use 
of such marks by 

D

e

WALT

 is under license. Other trademarks 

and trade names are those of their respective owners.

nOTE: 

The Tool Connect™ App is governed by separate 

terms and conditions available for viewing through the 
mobile application.

step 1: 

Download the 

D

e

WALT

 Tool Connect™ 

application at:

 

   

step 2: 

Follow the instructions in the app to create your 

Tool Connect™ account.

step 3: 

Connect your area light with the 

D

e

WALT

 Tool 

Connect™ app first by pressing the Tool Connect™ button 

 7 

 on the front of the light until it begins to blink. Then go 

to the Home screen of the app and select "+ Tool." The area 
light can only be connected to one Tool Connect™ account 
at a time.

step 4: 

Once the connection is established, you will be 

prompted to give the product an individual name as well as 
confirm that you would like to register the product on your 

D

e

WALT

.com account.

 

CAUTION:

 When using the scheduler, ensure 

the illuminated area is free of personnel before a 
scheduled turn off.

For more information on 

D

e

WALT

 Tool Connect™ 

functionality and features, please call 1–800–4-

D

e

WALT

 

(1–800–433–9258), visit 

www.

D

e

WALT

.com 

or view the 

FAQ page and help screens located inside the mobile 
application.

Using and Controlling the Area Light 
(Fig. A)

nOTE:

 For best results, make sure your battery pack is 

fully charged. Refer to 

Charging a Battery in the Area 

Light/Charger.

On/Off Button (Fig. A)

 

CAUTION: Do not stare into area light lens.

 

Serious eye injury could result.

To turn both halves of the light on, press the on/off button 

 2 

. To turn them both off, press the on/off button again.

Light Levels

The area light has 10 brightness levels. Maximum brightness 
for DC operation is 3000 lm. Maximum brightness for AC 
operation is 7000 lm. You can press the brightness up 
button 

 3 

 to increase the brightness level or press the 

brightness down button 

 4 

 to lower the brightness. Press 

and hold the brightness up button 

 3 

 to go directly to 

Содержание DCL070T1











Отзывы: