24
When pressed a menu appears offering 2 different settings:
By selecting ‘disable’ the interface will not automatically lock itself (see section
9.5.3.1).
Use the up/down cursor key followed by the selection key to initiate the chosen
setting.
The lock is only to be disabled in an environment where intentional/
unintentional tampering cannot occur – Drive DeVilbiss Healthcare
Ltd. recommend that the lock is always set to ‘enable’ regardless of
the environment.
Warning
3: Auto Lock
a: On
b:Off
When pressed a menu appears offering 2 different settings:
4: Weight Unit
a: kg
b:
lbs
By selecting this function the cycle time of the alternation sequence can be
manually altered, dependent on the patient’s requirements. Note, the default cycle
time for the system when first turned on is 10 minutes.
Use the up/down cursor key followed by the selection key to initiate the chosen
setting.
When pressed a menu appears offering 3 different settings:
2: Cycle Time
a: 10 mins
b: 15 mins
c: 20 mins
9.5.4.5 Cycle Time
9.5.4.6 Auto Lock
9.5.4.7 Weight Unit
Use the up/down cursor key followed by the selection key to initiate the chosen
unit of measure.
