background image

5 — ENG

WARNING

HAZARD

• Spray directed at electrical outlets or

switches, or objects connected to an
electrical circuit, could result in a fatal
electrical shock.

• Your washer operates at fluid pressures

and velocities high enough to penetrate
human and animal flesh, which could
result in amputation or other serious
 injury.  Leaks caused by loose fittings or
worn or damaged hoses can result in
injection injuries. DO NOT TREAT FLUID
INJECTION AS A SIMPLE CUT!  See a
physician immediately!

• Relieve system pressure before attempt-

ing maintenance or disassembly of
equipment.

• Use of acids, toxic or corrosive chemi-

cals, poisons, insecticides, or any kind of
flammable solvent with this product
could result in serious injury or death.

• Contact with hot surfaces, such as

engines exhaust components, could
result in serious burn.

• Fuel or oil can leak or spill and could

result in fire or breathing hazard, serious
injury or death can result. Fuel or oil leaks
will damage carpet, paint or other
surfaces in vehicles or trailers.

• Unplug any electrically operated product

before attempting to clean it. Direct spray
away from electric outlets and switches.

• Never place hands in front of nozzle.
• Direct spray away from self and others.
• Make sure hose and fittings are tightened

and in good condition.  Never hold onto
the hose or fittings during operation.

• Do not allow hose to contact muffler.
• Never attach or remove wand or hose

fittings while system is pressurized.

• Use only hose and high pressure

accessories rated for pressure higher than

your pressure washer's p.s.i.

• To relieve system pressure, shut off  engine,

turn off water supply, and pull gun trigger
until water stops flowing.

• Do not use acids, gasoline, kerosene, or

any other flammable materials in this

product.  Use only household detergents,

cleaners and degreasers recommended
for use in pressure washers.

• Wear protective clothing to protect

eyes and skin from contact with sprayed
materials.

• During operation, touch only the control

surfaces of the pressure washer.  Keep
children away from the pressure washer
at all times. They may not be able to
recognize the hazards of this product.

• If pressure washer is equipped with a fuel

shut-off valve, turn the valve to the off
position before transporting to avoid fuel
leaks. If pressure washer is not equipped
with a fuel shut-off valve, drain the fuel from
tank before transporting. Only transport fuel
in an OSHA approved container. Always
place pressure washer on a protective mat
when transporting to protect against damage
to vehicle from leaks. Remove pressure
washer from vehicle immediately upon arrival
at your destination.

WHAT CAN HAPPEN

HOW TO PREVENT IT

RISK OF

ELECTRICAL

SHOCK

RISK OF CHEMICAL BURN

RISK OF HOT SURFACES

RISK TO FLUID

INJECTION

WARNING

WARNING

WARNING

The powerful spray from your pressure washer is capable of causing damage to surfaces such as wood, glass,
automobile paint, auto striping and trim, and delicate objects such as flowers and shrubs. Before spraying, check the
item to be cleaned to assure yourself that it is strong enough to resist damage from the force of the spray. Avoid the
use of the concentrated spray stream except for very strong surfaces like concrete and steel.

Operating unit with water supply shutoff without flow of water will result in equipment damage. Operating the pressure
washer with water supply shutoff will void your warranty. You should never run this pressure washer for more than 2
minutes without pulling the trigger to allow cool water to enter the pump and the heated (recirculated) water to exit.

RISK OF INJURY AND

PROPERTY DAMAGE

WHEN

TRANSPORTING OR

STORING

DANGER

IMPORTANT SAFETY INSTRUCTIONS

Содержание 2225CWH





















Отзывы: