DeviceWell HDS7105, Руководство пользователя

Страница: 34 / 44

32
SWITCHER
V
Press the menu
In the system setting menu, you can choose two different languages: Chinese or English; the fan speed can also be
controlled manually, and the device defaults to the state of intelligent temperature control. You can also enter the
next-level menu to manually select 10 kinds Speed: F7 is a multiplex key, you need to go to the system settings of
the menu to set the function of this key, setting the chroma key is the keying function, setting the brightness key is
the superimposed subtitle function, and setting the vertical OSD needs to be coordinated Only the Devicewell
PM1005/PM1007 monitor is effective. MIC volume can be adjusted. If you encounter an unknown error during use,
you can choose to restore the factory settings to reset.

GPI settings
Press the menu

Record settings
Press the menu

Stream settings

Device information
The recording level can be set in the recording settings, there are low, medium, high and super high to be set, the
corresponding bit rate is 6M/12M/18M/24M;The storage method can choose TF card.
The LED will flash during recording, and the recording status will be displayed in real time in the status display bar of
the switcher.
1. The LED will flash during recording, and the recording status will
be displayed in real time in the status display bar of the switcher.
REC is red and recording is in progress.
2. Recording time.
3. TF card recording free space.
4. Streaming screen: Press the F6 button and the light is on, TRMP
displays red, the recording and streaming screens rotate 90 degrees at
the same time, the display degree can be seen behind the
multi-screen status bar RTMP, the normal 16:9 screen displays 0
degrees, vertical screen Show 90 degrees. Vertical screen needs to
cooperate with Devicewell PM1005/PM1007 monitor to have effect.