DeviceWell HDS7105, Руководство пользователя

Страница: 40 / 44

38
SWITCHER
④
10. Failure and Maintenance

(1) The output image may be flickered by interference. The quality of the wire used may be poor, and the shielding
layer of the wire is not well prepared. When there is a strong radio near the use environment, radio waves may interfere
with the transmission of the signal, resulting in unstable signal flicker. Please use the wire produced by regular
manufacturers, such as Belden, Jia Nai Mei.
(2) When plugging in the audio and video interface, if there is obvious static electricity, the device power ground wire
may not be good grounding, please ground in the correct way; otherwise it will easily damage the host and shorten the
life of the mainframe.
(3)When RJ45 cannot control the Switcher, check whether the communication port set by the control software
corresponds to the serial port of the connected device; check if the communication port of the computer is good.

Maintenance
9. Synchronize regional time
1.Go to Devicewell official website to download the time synchronization software, www.devicewell.com
search keyword time synchronization;
2.Double-click to open the time synchronization software
3.Software function introduction, open the software default automatic setting function
①
Connect the device to the internet cable and be in the same local area network as the computer. Click Auto
Sync, and the computer will automatically synchronize your device time. The red box in the figure is the IP
address of your device that is normally connected;
4.Manual setting, if you change the time by yourself, you need to check the manual setting function; after
filling in the time you need to set, click manual confirmation;
②
① ②