devention DEVO-7, Руководство пользователя

Страница: 128 / 171

DEVO-7 Page 128 of 170
Press UP or DN to select using switch, press R or L to select switch Act or Inhibit.
After settings, press EXT to exit
3.8 Balance
This function can adjust the parameters of the two servos which are used in the dual
channels. It should be previously chosen one of the these wing types of Flaperon,
DELTA and V Tail in Wing Type at Model Menu. Refer to “2.10 Wing Type”.
Setting method:
Press ENT key in main interface to get twinkling main menu, then press UP or DN
until flash FUNCTION appears, press ENT to enter function menu. And then Press UP
or DN, it will come out bright BALAN, press ENT to enter Channel Rudd surface, refer
to below picture.
1
）
Channel Selection
1) Press R or L in above interface to make the channel you want flash, press DN to
enter Point parameter adjustment