devention DEVO-7, Руководство пользователя

Страница: 163 / 171

DEVO-7 Page 163 of 170
press R or L(if Elevator is at Servo Hold, and 0%) , decrease or increase, the position
amount which centers on the neutral point of servo. The settable range is 125%, and
0% is the servo’s neutral position.
Press DN to confirm enter other channel.
The setting methods for other channels are same as above
Click the “EXT” to exit after finished.
Note:
checking whether all the actions when fail safe happened are correct is a must
after the setting is finished. It is dangerous to use full throttle, especially after fail safe
taken place.
3.19
（
TRAIN
）
Two DEVO-7 transmitters working together can execute the training function to meet
the requirements for the beginner. The setting method is shown as below:
1 ） Data copy
First,using the wireless copy function of the two DEVO-7 transmitters.the model data
saved in the trainer’s transmitter can be transmitted to the trainee’s to ensure the
model parameters are exactly same.Regarding the copying method,,refer to “2.4
Model Wireless Copy”
2 ） Linkage
Insert the signal wire from the trainer’s transmitter into the DSC socket of the trainee’s
transmitter. Turn on the transmitter and a linkage icon will be shown on the boot
screen PC 0%( and MOD alternate display), shown as below. Find out the trainee’s
model data