devention DEVO-7, Руководство пользователя

Страница: 43 / 171

DEVO-7 Page 43 of 170
3.3 (Sub Trim)
Sub Trim is used to make parallel movement of the neutral point of the servo. But we
advise you to mechanically adjust the servo bell crank if offset is far away from the
neutral point of servo. Because servo would be damaged if excessive usage of the
sub trim and beyond its range.
Setting: Press ENT to enter Main Menu, press UP or DN until “FUNCTION” flash, and
then press ENT to enter Function Menu; Press UP or DN to flash “SUBTR”; Press
ENT to enter the enactment options for channel names and flashing neutral point
value. It is possible to change the neutral point setting value through R or L button,if
the direction is reverse, change the sign “+””-” before value. Press DN button, there
are travel range enactment options in turn for AILE, THRO, RUDD, GEAR, PITCH,
GYRO and so on. The setting are the same as above, here we take the ELEV for
example.
Every channel default value is 0.0%. Adjust ranges as below:
Channel name
Adjustment range
Channel name
Adjustment
range
Elevator D62.5%-U62.5% Gear -62.5%- +62.5%
Aileron R62.5%-L62.5% Pitch L62.5%- H62.5%
Throttle L62.5%-H62.5% Gyro -62.5%- +62.5%