devention DEVO-7, Руководство пользователя

Страница: 15 / 171

DEVO-7 Page 15 of 170
the methods for switching:
8.1
Right Throttle Switch To Left Throttle
1 ） MECHANICAL switch
Remove the 6 fixed screws in the base plate.Below are shown the inside views of left
and right throttle sets, respectively. Use cross screwdriver to loosen and remove
Linkage Fixed Screw, Screw F, Screw G, and Throttle Control Spring in right throttle
set, respectively, and then mount them in the corresponding positions in left throttle
set. And then adjust the screw F tension according to your habit. Cover the base plate
after accomplishment
2
）
The ELECTRONIC switch
In the main surface touch the “ENT” Icon, it will come out the flashing “System”. Touch
the
“
ENT
”
Icon to enter System Menu; and then touch the UP or DN to enter the
flashing “
STMOD” menu
, press “ENT” and then select the mode you desire. Touch
UP or DN, then come out the flashing “ MODE2” or “ MODE4”, touch “EXT” icon to
exit.
The model data will be automatically switched when touching MODE 2 or MODE 4.
The switch from right-hand throttle to left-hand throttle is finished after both the
MECHANICAL and ELECTRONIC switches changed, respectively. And the
transmitter is ready to normally work now.
8.2 Left Throttle Switch To Right Throttle
1
）
MECHANICAL switch
Refer to the above steps of “MECHANICAL switch”, open the base plate