Develop FK-506, Руководство пользователя

Страница: 282 / 316

7
Troubleshooting
7-4 FK-506
7.2 When faxing is not performed correctly
Faxes cannot be sent
Symptom Possible cause Remedy
The document cannot be
scanned. Is the document too thick? Position the document on the
original glass to send it. (See
p. 3-9.)
Is the document tool thin or too
small? Position the document on the
original glass to send it. (See
p. 3-9.)
Is the original glass dirty? Wipe the original glass with a
soft, dry cloth.
The document was
scanned at an angle. Were the document guides cor-
rectly adjusted to the width of
the document? Adjust the document guides for
the size of the document. (See
p. 3-6.)
The fax received by the
recipient is not clear. Is the document incorrectly po-
sitioned? Position the document correct-
ly. (See p. 3-6.)
Is the original glass dirty? Wipe the original glass with a
soft, dry cloth.
Is the text in the document too
faint? Adjust the scanning density.
(See p. 6-69.)
Is there a problem with the tele-
phone connection or with the re-
cipient’s fax machine? Check that this machine can
make clean copies. If it can, try
sending the fax again.
The fax received by the
recipient is blank. The document was sent with the
front side facing down (when us-
ing the document feeder). Load the document with the
front side facing up, and then try
sending the fax again. (See
p. 3-6.)
Faxes cannot be sent au-
tomatically. Was the fax number incorrect? Check the fax number.
Is a number specifically for tele-
phone calls being dialed? Check the fax number.
Is there a problem with the re-
cipient’s fax machine (it is out of
paper, it is not set to receive fax-
es automatically, it is turned off,
etc.)? Have the recipient check their
fax machine.