Develco ZHEMI-101, Техническое руководство

Страница: 14 / 21

External Meter Interface – ZHEMI-101 – Technical manual
Develco Products A/S Olof Palmes Allé 40 http://develcoproducts.com
DK-8200 Aarhus N info@develcoproducts.com
14
4.1.5.2 0x03 Formatting attribute set
The following set of attributes provides the ratios and formatting hints required to transform the received
summations, consumptions or demands/rates into displayable values. If the Multiplier and Divisor attribute values
are non-zero, they are used in conjunction with the SummationFormatting, ConsumptionFormatting, and
DemandFormatting attributes.
Id# Name Type Range Man/Opt Note
0x00 UnitofMeasure 8 bit enum 0x00 to 0xFF M Set based on unit in “ 0-
n:24.2.1 ”
0x01 Multiplier Uint24 0x000000 to
0xFFFFFF
O Fixed to 1
0x02 Divisor Uint24 0x000000 to
0xFFFFFF
O Fixed to 1000
0x03 SummationFormatting 8 bit bitmap 0x00 to 0xFF M
0x06 MeteringDeviceType 8 bit bitmap 0x00 to 0xFF M Set based on “ 0-n:24.1.0 ”
Supported: Gas, Water and
Electricity
Above attribute description is to be found in section D.3.2
.2.4 “Formatting” ZigBee Smart Energy Profile
Specification provided by the ZigBee alliance.
4.1.5.3 OBIS code mapped into ZigBee attributes
When the interface mode is configured to “P1 dutch standard – DSMR 4.0 version” the following OBIS code are
mapped into the following ZigBee attributes:
OBIS Code ZigBee Attribute Name
ZigBee
Attribute Id ZigBee
Endpoint
Comment
1-0:1.8.0 CurrentSummationDelivered 0x0000 0x02 If OBIS code not present, will
be the sum of 1-0:1.8.1 and 1-
0:1.8.2
1-0:2.8.0 CurrentSummationReceived 0x0001 0x02 If OBIS code not present, will
be the sum of 1-0:2.8.1 and 1-
0:2.8.2
1-0:1.8.1 CurrentTier1SummationDelivered 0x0100 0x02
1-0:2.8.1 CurrentTier1SummationReceived 0x0101 0x02
1-0:1.8.2 CurrentTier2SummationDelivered 0x0102 0x02