*** NOTE:
Please note that the device must
NOT
be connected to the
electrical network during the assembly. Please observe the safety standards.
Step 2:
Use a
star blade screwdriver
№
PH2
to unbolt the bolts holding the cover of
the device on its left and right side.
Picture 2
and
Picture 3
show the position
of the bolts.
(For your convenience we have circled them in red.)
Place the unscrewed bolts near you so that they can be at hand during the
reassembling of DB-9000RX Professional IP Audio Decoder with Stereo and
RDS Encoder Module.
Picture 2
Picture 3
