*** NOTE:
Please note that the device must
NOT
be connected to the
electrical network during the assembly. Please observe the safety standards.
Step 3:
Use a
star blade screwdriver
№
PH1
to unscrew bolts with numbers from 1
to 8 which hold the rear cover of the device.
Picture 4
displays the position of
the bolts.
(For your convenience we have circled them in red.)
Bolts 9 and 10, placed on both sides of the RS-232 Com-port, have to be
unscrewed with a
hex screwdriver
№
5
.
(Circled in yellow on
Picture 4
)
Place the unscrewed bolts near you so that they can be at hand during the
reassembling of DB-9000RX Professional IP Audio Decoder with Stereo and
RDS Encoder Module.
Picture 4
