DEV 1953, Руководство пользователя

Страница: 87 / 143

User Manual DEV 1953

Copyright DEV Systemtechnik GmbH 2015-2017 87
After selecting the Switching Actions entry on the left side of the Setup Tab in the
submenu "Actions", click on the item "Add new action" and enter a name in the
appearing text field. When defining actions it is recommended to enter a meaning-
ful name (here: "to 1-1 2-2 3-1 4-2"). This enables a better distinction when
selecting the appropriate action in the setup of the Time Based Switching func-
tionality or in the setup of the TRAC functionality later.
Then select the name in the list to enable the definition of the action (alternatively
and if applicable, click on an existing action to modify it):
The action is defined by selecting the module outputs (via the check boxes below
the "On" label) and then the input port (via the drop down list below the "Input"
label) as the target switching position. Depending on the application, one or more
actions need to be defined.
Note:

Do not forget to click on the button to store the settings made
before selecting (or adding) another action, or before proceeding e.g. with the
Time Based Switching setup (chapter 5.5.7.3.4), or with setting up the TRAC
functionality (chapter 5.5.7.3.5)!

Again, it is recommended to perform Time Based Switching (and TRAC as well)
with the device set to Individual switching mode. If it is intended to switch a
number of switch modules synchronously, rather the definition of an action is
recommended which defines the desired target switch positions for the single
switch modules.