DEUTZ-FAHR AGROTRON 106 MK3, Руководство по ремонту

Страница: 135 / 150

20-17
3.1.2 GRAPHICS
Once any desired measured values are selected, up to a maximum of 5, the window "Graphic display" can be opened by
clicking on "Graphics".
The measured values are represented inside the display range (minimum to maximum). The scaling steps for the axes are
set in the column "Delta". By activating the control field "Auto", it is possible to have the program carry out scaling au-
tomatically. Since the program carries out this scaling taking into account the minimum and maximum values for the var-
iables concerned, it is not possible to have automatic scaling with variables which are constant in time. A maximum of two
axes, one on the left and one on the right side of the display area, are shown.
In the columns L (left) and R (right) a representation of an axis can be assigned to a measured variable.
EXPLANATION OF THE FUNCTION SWITCHES:
START: This function switch is used to start recording of the data.
UPDATE: This function switch is used to update the displayed information. This is necessary if there has been a change in
the minimum, maximum or delta values. The update process takes the new values into account.
PRINT ON: By clicking on this switch the transmission to a printer is started. First the printer selection appears, then a com-
ment can be inserted if desired, and then printing starts.
SAVE: The Information from the representation displayed can be saved in a file in two different ways:
• As an ASCII file ('.agr) for further processing in Excel
• As a binary file (*.egr) to represent measurement graphics in OFFLINE mode. See 1.7 Offline mode.
The graphics information saved in a file is read in and displayed.
SERDIA MEASURED VALUES