DEUTZ-FAHR AGROTRON 106 MK3, Руководство по ремонту

Страница: 127 / 150

20-9
1.8 WORKING WITH THE PROGRAM
Brief description:
1) Call SERDIA under Windows
2) Click on ECU selection in the SERDIA main screen
3) Select the ECU you require in the screen "ECU selection"
4) Select the menu point you require in the SERDIA main screen
1.8.1 MAIN SCREEN, MENU SELECTION
A predefined selection menu is displayed in the main screen. Brief description of the buttons:
Menu point ECUs Explanation
ECU selection All
Selection of the required ECU.
(Only one ECU can be selected at any time)
Aktuelle Actual measured values All
Display of current actual values (also if engine not in operation,
but in this case with U-Blatt)
RAM values Only for level III
Data logger EMS Only Display recorder contents
Input/output assignment All Assignment of the signals used to the ECU pins
CAN-Status
Parameters
Configuration All Read and update configuration data
Overall programming EMR, EMS
Calibration All
Calibration of measured value sensor, e.g. accelerator
pedal sensor
Error memory
Error memory All Copy, display and delete error memory
Function test EMR Only Operate actuator
Extras
Maximum speed EMR Only Selection of three different maximum speeds
Logistic data All
Load spectrum EMS Only
Maintenance interval exceeded EMS Only
Override memory EMS Only
Help All General help for the main screen and the associated buttons
SERDIA ENTRY AND COMUNICATION