DEUTZ-FAHR AGROTRON 106 MK3, Руководство по ремонту

Страница: 121 / 150

20-3
1.1.2 HARDWARE AND SOFTWARE
You should have the following minimum system configuration in order to work with SERDIA:
Hardware:
• Notebook o PC (IBM-AT compatible):.... with 1 serial interface RS 232 (There should be no mouse connected) and par-
allel printer interface
• Grafiphs carde:....................................... VGA/SVGA
• Processor: .............................................. 80486 (or later)
• Frequenz:................................................ 100 MHz
• RAM:....................................................... 8 MB RAM (or later)
• Hard disk (free memory capacity): ......... 15 MB (or later)
• Diskdrive:................................................ 3,5” (1,44 MB)
ECUs (engine):
• EMR (Elektronischer Motor-Regler)........ Electronic engine governor,
ECU TN 0211 1910 e 0211 2017
Software Version N° 12.1.08 and lower
• Diagnostics interface.............................. Serial in ace. with ISO 9141
Interface, connector piece between ECU (engine) and PC:
• Level adaptator for ISO 9141, SAE J1708 e RS 485
• Safety switch with dongle function, copy protection
• Power supply range 12-24 V
• Power supply side: Engine
• Protective switch against incorrect polarity and surge voltage
• Decoupling
Software:
• Operating system ................................... DOS versione 5.0 or later
• User surface ........................................... MS-Windows

3.11 or Windows 95
Installation is also possible under Windows 3.1; however, this creates a specific Windows problem: Conflicts may occur
when accessing serial interface COM1 (see Chapter 8, What should you do if...?). Further information is also given in the
Readme file supplied with SERDIA).
For proper display of the contents of the SERDIA windows under Windows 3.11, you should install the standard screen
driver (VGA).
1.2 ORDERING
SERDIA can be ordered, like the DEUTZ special tools, through:
SAME-DEUTZ-FAHR GROUP S.p.A.
Viale F. CASSANI, 15
24047 TREVIGLIO (BG) - ITALIA
1.2.1 FIRST-TIME USERS
For first-time users, we recommend the SERDIA package Re-order No. 5.9030.740.4/10.
Scope of supply:
• SERDIA software (1 x 3.5' installation diskette)
• Diagnostics interface with implemented user level
• Brief instructions on installation
• A list of tools and modifications usefui when troubleshooting, is included
• Carrying case
SERDIA ENTRY AND COMUNICATION