Desoutter Delta Wrench 150 Nm, Руководство пользователя, Страница: 87 / 184

Part Number
Issue
Date
Page 6159937790
12
03/2018
87 / 184
87 (184) 03/2018
For
Residual torque strategies, the Abort Cycle Time is the only timeout available in the test strategy;
for Residual Torque/Angle and Residual Torque/Angle Automatic , when the residual torque is
detected the test ends even if the timeout has not expired.
6.5 Batch Parameters
Batch count Enable this flag to execute the Pset more than once.
Batch size If Batch count is enabled, it specifies how many times the Pset must be
executed.
Maximum value: 99
NOTE : If the Batch count is disabled, the Batch status in the
tightening results is always OK.
By enabling the
Batch count and setting the Batch size to 1, it is
possible to have the Batch result OK only if the Pset gives result OK.
If the Batch size is greater than 1, the Batch result is OK only if all of
the Pset give result OK.
Cycle start
Target torque
Abort cycle time End cycle time
Time
Time
Torque
The test ends when
the torque remains
below the Cycle
Start for more than
the timeout
Before the torque
reaches the Target
Torque , the Abort Cycle
Time is applied
After the torque
reaches the
Target Torque ,
the End Cycle
Time is applied