Desmi NSL 100-215, Инструкция по эксплуатации и обслуживанию

Страница: 77 / 151

DISMANTLING THE PUMP SET
DESMI Pumping Technology A/S
Tagholm 1
9400 Nørresundby
– Denmark
Tlf. nr.: +45 96 32 81 11
Fax +45 98 17 54 99
75
E-mail: desmi@desmi.com www.desmi.com
9. DISMANTLING THE PUMP SET
. DANGER
IGNORING INSTRUCTIONS HAZARD!
Insufficient preparation of work on the pump (set) will cause death or serious injury.
Properly shut down the pump set. ( See chapter 6.5 )
WARNING
SPECIAL SKILLS REQUIRED!
Repair and maintenance procedures require professional knowledge and thorough
training regarding the tasks and working methods.
Do not do any repair or maintenance tasks without proper training.
Always follow the instructions.
Use appropriate personal protective equipment, depending on the task.
WARNING
HOT SURFACE HAZARD!
Touching any part of a hot pump can cause severe injury.
Always allow the pump set to cool down to ambient temperature.
WARNING
FALLING LOAD HAZARD!
Incorrect lifting methods and faulty lifting equipment, can cause lifting equipment to
snap under load, which could cause death or severe injury.
Use appropriate transport devices, lifting equipment and lifting tackle to move heavy
assembies or components.
Always observe the safety instructions and information.
For any work on the motor, observe the instructions of the relevant motor manufacturer.
For dismantling and reassembly observe the exploded views and the general assembly drawing.
In case of damage you can always contact our service staff.