manualshive.com logo in svg

Desert Aire CM3500 Series, Инструкция по установке и эксплуатации

Поделиться
Скачать
Desert Aire CM3500 Series Скачать руководство пользователя страница 55

55

 

 

 

will be modulated to maintain the entering air temperature. The enthalpy 

 

 

 

wheel speed increases to increase the off-wheel temperature. This screen 

 

 

 

allows modification of the PID loop Gain (or Proportional Band) and Reset 

 

 

 

(or Integral). The range of the Gain is 0.0% to 99.9%. The range of the Reset 

 

 

 

is 0 to 999. The range for the Set Point is 0.0% to 99.9%. The Supply Air 

 

 

 

Temperature Set Point and the Supply Air Temperature are displayed here to 

 

 

 

aid in the tuning of the PID loop. To modify these set points, press the 

ENTER 

 

 

 

key until the desired set point is selected and use the arrow keys until the 

 

 

 

desired setting is shown. Press the 

ENTER

 key to accept the set point value.

 

 

 

To return to the Parameter Settings, press the 

Esc

 key.

 

 

 

 

 

 

          

Figure 62

 

 

2.6.2.7 Condenser Settings (Figures 63 - 64)

 

 

 

This screen will only be shown if the Condenser Control option is selected in 

 

 

 

the Factory Configuration. On a single circuit system, the discharge pressure 

 

 

 

controls the cycling of the condenser fans based upon the set points listed. On 

 

 

 

a dual circuit system, the highest discharge pressure controls the cycling of 

 

 

 

the condenser fans. All of the Condenser Fan cut in and cut out set points are 

 

 

 

available for modification on this screen.  To modify these set points, press 

   the 

ENTER

 key until the desired set point is selected and use the arrow keys 

 

 

 

until the desired setting is shown. Press the 

ENTER

 key to accept the set point 

   value. 

Press 

the 

UP

 or 

DOWN

 key to view the Condenser Fan Overload 

   Count 

screen.

 

 

 

To return to the Parameter Settings, press the 

Esc

 key.

 

Desert Aire - CM3500 Manual

Содержание CM3500 Series

















































































Отзывы:

Нет отзывов

Бренды по названию

Популярные бренды

Загрузить еще бренды