manualshive.com logo in svg
background image

                                                                                                        -10-                                           

For more information, visit www.desatech.com

 

OPERATING GUIDELINES AND  

MAINTENANCE INSTRUCTIONS 

 

When lit for the first time, the appliance may emit a slight 

odor for about an hour or two.  This is normal and is due to the 

"curing" of the logs and the "burn-in" of internal paints and 

lubricants used in the manufacturing process. Keep 

compartment, logs, burners, and area surrounding the logs 

clean by vacuuming or brushing at least twice a year.   

 

Temporary removal of the log set may ease the cleaning of the 

burner and pilot assembly.  In cleaning, take care not to alter 

the pilot or burner location. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

FOR FURTHER OPERATING GUIDELINES, 

CONTACT YOUR AUTHORIZED REPRESENTATIVE. 

 

REPLACEMENT AND ACCESSORY PARTS 

 

Log Set

:  Front, rear and top twigs come standard with all units. 

Pilot Assembly

:  If in need of replacing, have a qualified 

technician replace it. 

Gas Control Valve

:  If in need of replacing, have a qualified 

technician replace it. 

Toggle Switch

:  The toggle switches and millivolt wires come 

standard with this appliance.  

Fan Kit

:  The fan kit is optional and may be installed at any 

time.  Installation instructions are included with the fan kit. 

Ceramic Fiber Embers

:  This ember material will provide a 

warm red glow and 'licks' of flame when operating the gas log 

set. 

• 

When ordering replacement or accessory items, please have 

your appliance's model and serial number ready. 

• 

The model and serial number for your particular appliance 

may be found on the rating plate located inside the 

appliance. 

• 

Refer to the parts list and diagrams when ordering 

replacement parts for your appliance. 

• 

Repair parts or accessory items may be bought from your 

distributor/dealer. 

• 

All product specifications are subject to change without 

notice. 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

 

Have a qualified agency periodically inspect the vent
system at the start of each heating season for any
obstructions that may hinder its normal operation.  Never
obstruct the flow of combustion and ventilation air.  Keep
the front of the appliance clear of all obstacles and
materials. 

WARNING: Children and adults should be alerted to

the hazards of high surface temperatures and to stay away
from these to avoid burns or clothing ignition.  Young
children should be carefully supervised when they are in
the same room as the appliance. 

WARNING: Do not strike, slam, or abuse glass door. 

IMPORTANT: Turn off gas and toggle switch before
servicing appliance.  Any safety screen or guard removed
for servicing the appliance must be replaced prior to
operating the appliance. 

CAUTION: The unit and logs can get very hot-handle
only when cool. 

CAUTION: If the glass breaks, be cautious of fragments
on the floor.  Keep children away from the area.  Do not
operate unit when glass is broken. Use proper gloves to
remove the glass door. Discard safely.   

A glass door kit can be ordered through your local
distributor.  Do not use substitute material for glass.  Any
household glass cleaner may be used to clean the glass
panel. Do not use abrasive cleaners as this may damage
the glass.  Clean glass only when cool. 

 

WIRING DIAGRAM

Содержание GW30B
















Отзывы: