background image

Page 1

OWNER’S MANUAL

AND INSTALLATION 

INSTRUCTIONS

WARNING

If the information in these instructions are 

not followed exactly, a fire or explosion may 

result  causing  property  damage,  personal 

injury or loss of life.

—  Do not store or use gasoline or other 

flammable vapors and liquids in the 

vicinity of this or any other appliance.

—  WHAT TO DO IF YOU SMELL GAS

•  Do not try to light any appliance.

•  Do not touch any electrical switch; do 

not use any phone in your building.

•  Leave the building immediately.

•  Immediately  call  your  gas  supplier 

from  a  neighbor’s  phone.  Follow  the 

gas supplier’s instructions.

•  If you cannot reach your gas supplier, 

call the fire department.

— 

Installation and service must be 

performed by a qualified installer, 

service agency or the gas supplier.

INSTALLER: 

Leave this manual with the appliance.

CONSUMER: 

Retain this manual for future reference.

Attention: Check local codes for venting requirements.

Young children should be carefully supervised when 

they are in the same room as the appliance.

If installed in a direct-vent application, this appliance 

may  be  installed  in  an  aftermarket,  permanently 

located, manufactured home or mobile home, where 

not prohibited by state or local codes.
This appliance is only for use with the type of gas 

indicated  on  the  rating  plate.  This  appliance  is  not 

convertible for use with other gases, unless a certified 

kit is used.

Carton Contents:

UltraSaver 90 Plus Wall Furnace (with shroud attached)

Instruction Envelope Containing:

    Owner’s Manual and Installation Instructions

    Shut-off Valve

    2-1/2” Hose Clamp

    Hardware Pack Containing:

        (4) - #10 x 1-1/2” Hex Head Screws

         4’ - 3/8 I.D. Condensate Drain Hose

WARNING

If  not  installed,  operated  and  maintained 

in accordance with the manufacturer’s 

instructions, this product could expose you 

to substances in fuel or from fuel combustion 

which can cause death or serious illness.

ULTRASAVER 90 PLUS

WALL FURNACE

MODELS

PVS18(N,P)-3

PVS35(N,P)-3

 

 

Summary of Contents for PVS18N-3

































































































Reviews: