13
ASSEMBLING THE HAND-PIECES
Assemble the silver and gold hand-pieces the same way.
Connect the other side of the tubing to the hand-piece.
Put the pink end into the larger hole.
Put the blue end into the smaller hole.
Twist the fitting on the tubing
to seal the connections. Tug the
hand-piece to make sure that it is secure.
CLEANING THE HAND-PIECES
Ream out the hand-piece using the needle in the spare-parts kit.
Thoroughly rinse out the crystals inside the openings of the hand-piece.
Thoroughly wash the exterior of the hand-piece.
After treating each patient, sterilize the hand-piece by using an autoclave or alcohol.
Replace the hand-pieces after 300 uses.
NOTE
USING THE DISPOSABLE TIPS
From the same carton, remove the tip that you will use for treatment.
The tips determine the
depth
of the treatment. Start with the shallowest and move deeper as treatments
progress.
Use the
clear tip
for most treatments, especially the first treatment. Adjust
pressure to at least 45 kPa. Use the clear tip.
Notice 2 holes on the top of the hand-piece.
Screw the clear tip into the hand-piece, placing the divider goes
between the 2 holes.
Leave some space showing between the divider and the hand-
piece.
CAUTION:
Do not over-twist the tip. The gap needs to remain in
place.
Use the
gold tip
for patients interested in more aggressive treatments. Start
with pressure of at least 35 kPa with the gold tip, which excels for areas with
tougher skin, such as the back, feet and scars.
Attach the tubing to the gold hand-piece the same way you
attached it to the silver hand-piece.
WARNING:
Because this tip is very powerful, start the pressure at
no more than 35 kPa.
Change the tubing and the orange pressure-locking ring every 9 months.
Содержание MEGAPEEL EX SILVER SERIES
