DERMAMED MEGAPEEL EX SILVER SERIES, Инструкция пользователя

Страница: 14 / 51

Silver
Series
14
NOTE
You can purchase the blue tips separately. They are designed for those
staff who are used to working at a 45 degree angle. The blue tips work for
moderate to aggressive peels. Start the pressure at no less than 45 kPa.
Š Š Attach the blue tip, screwing it on just to the point that the thin
black line on the hand-set lines up with the raised line on the blue
tip.
SETTING THE VACUUM PRESSURE TO START MEGAPEEL EX
TREATMENT
The vacuum pressure setting determines the power of the treatment. The vacuum control knob is the
knob on the left-hand side. The pressure plus your chosen tip determine the depth of the treatment as
well. The MegaPeel EX uses kPa (kilopascals) as to measure vacuum pressure.
Š Š
For the 1
st
treatment for each patient, test the patient’s reaction and comfort level.
Š Š Use the clear tip.
Š Š
Set the vacuum pressure up to 45 kPa.
Š Š Increase the pressure slowly if you want a more aggressive peel.
Š Š
If you are using the gold tip for a more aggressive peel, start the pressure at 35 kPa.
SETTING THE CRYSTAL FLOW
Š Š On the outside of the machine, lower the crystal flow dial on the right by turning it to the left,
counterclockwise, as far as you can without stopping it.
Š Š Use a minimal amount of crystals – just enough to abrade the skin – to achieve the best results.
NOTE
Š Š If you have questions, please visit our website or call us at 610-358-4447.
NOTE
Almost all patients treated with the gold tip will experience crusting from dried serum.
Crusting, which is normal, indicates that you performed the procedure properly.
The crusts clear on their own in 3 to 5 days after treatment.
Tell patients that they can avoid crusting if they keep the skin moist after treatment. We recommend
the use of dmSkincare’s argan boost serum™
The machine produces a little tornado of crystals in the top of the tip. Do not fill the whole side of
the tip with crystals. If you have your crystals turned up too high, you will waste crystals. You will not,
however, damage the machine.
When you place your last crystal and filter set in the system, please call and order a new box of supplies.