I
NSTALLATION
16
/
24
DERMALOG FLC1 Light Edition User Guide
7
Installation
Before commissioning the DERMALOG FLC1 Light Edition perform the following steps:
Position the DERMALOG FLC1 Light Edition see chapter 7.1
Connect the hardware
see chapter 7.2
Install the software package
see chapter 7.3
Calibrate the DERMALOG FLC1 Light Edition see chapter 7.4
7.1
Position the DERMALOG FLC1 Light Edition
Only use the DERMALOG FLC1 Light Edition indoors.
Place the DERMALOG FLC1 Light Edition on a suitable mount, e.g. a tripod.
Observe the recommended temperature range for the DERMALOG FLC1 Light Edition to operate (see chapter 5).
To achieve the best possible results, it is recommended to operate the DERMALOG FLC1 Light Edition under
the following conditions:
20 °C to 24 °C (68° F to 76 °F), humidity 20-50 %.
Provide adequate space around the DERMALOG FLC1 Light Edition for operation and maintenance. Air
circulation is required to cool the device. Do not restrict the air flow around the device.
Use the DERMALOG FLC1 Light Edition only in a dry environment.
Keep the working environment always clean and dust-free.
Do NOT expose the DERMALOG FLC1 Light Edition to:
direct sunlight
excessive dust, heat or humidity (for example, through water heater or humidifier)
an atmosphere where ammonia gas or volatile or flammable chemicals are present (for example,
alcohol, paint thinner)
vibrations
rapid temperature changes
magnetic fields (for example, if placed near loudspeakers, televisions or radios)