S
AFETY INSTRUCTIONS
10
/
24
DERMALOG FLC1 Light Edition User Guide
3.6
Operation
Make sure all people working with the DERMALOG FLC1 Light Edition have read and understood this user guide
and received a thorough training.
The DERMALOG FLC1 Light Edition contains a camera of the Intel® RealSense
TM
D400 series. The Intel®
RealSense
TM
D400 series is classified as Class 1 Laser Product under the EN/IEC 60825-1, Edition 3 (2014)
internationally and IEC60825-1, Edition 2 (2007) in the US.
The Intel® RealSense
TM
D400 series complies with US FDA performance standards under 21 CFR 1040.10
for laser products except for deviations pursuant to Laser Notice No. 50 dated June 24, 2007.
Caution – Use of controls or adjustments or performance of procedures other than those
specified herein may result in hazardous radiation exposure.
Do not power on the product if any external damage was observed.
There are no service/maintenance, modification, or disassembly procedures for the stereo
module and infrared projector. The system integrator must return modules before any failure
analysis is performed.
Do not attempt to open any portion of this laser product.
Invisible laser radiation when opened. Avoid direct exposure to beam.
There are no user serviceable parts with this laser product.
Modification or service of the stereo module, specifically the infrared projector, may
cause the emissions to exceed Class 1.
No magnifying optical elements, such as eye loupes and magnifiers, are allowed.
Do not try to update camera firmware that is not officially released for the specific
camera module SKU and revision.
If the DERMALOG FLC1 Light Edition makes strange noises, or gives off smoke, heat or strange odors, or other
abnormalities occur when in use, immediately disconnect it from the computer. Then contact DERMALOG.
Keep liquids away from the DERMALOG FLC1 Light Edition.
Do not drop the DERMALOG FLC1 Light Edition or subject it to impact or strong shock.
Use the DERMALOG FLC1 Light Edition only for the purpose it has been designed for.
Do not connect other devices to the same USB hub.