Safety Instruc�ons
PHOS s pole mount pro
5
•
The projector’s beam of light can reach high tempera-
tures at close range. Keep flammable materials at a
safe distance (0.5 m) from the light exit point. This
distance increases the more projectors are used to il-
luminate one loca�on. Ensure that flammable materi-
als (e.g. curtains) are kept away from the danger area.
•
The projector heats up during opera�on. Risk of bur-
ning! Let the projector cool down for at least ten mi-
nutes before changing a projec�on mo�f or handling
the projector in any other way.
•
The projector is ac�vely or passively cooled depending
on its type and requires an unrestricted flow of air for
cooling. Keep a minimum distance of 30 cm from walls
and objects on all sides.
•
Do not cover the projector with film or insula�ng ma-
terials. Do not operate the projector in enclosed hou-
sings. Cooling is only effec�ve if the hot air being
released can escape and cool air can flow in freely.
•
Protect the front lens from direct sunlight. Sunlight is
concentrated through the front lens and can cause da-
mage or fire inside the projector
1.5 Op�cal radia�on hazard
The projector is classified in risk group 2 (RG-2) of the pho-
tobiological hazard classes in accordance with the DIN EN
62471-5 standard. The following safety regula�ons must be
observed to combat the risk of glare caused by visible op�-
cal radia�on:
•
Do not stare directly into the beam of light.
•
Never look directly into the beam of light at close ran-
ge (<1 m). Permanent eye damage may occur if you ex-
pose yourself to the beam of light within the danger
area.
•
Install the projector in places where a distance of
more than 1 m can be maintained from the eyes of
people exposed to the beam of light.
•
Change the gobo only when the projector is switched
off.
•
Do not make any modifica�ons to the projector’s op�-
cal components (projec�on lens, other lenses, bulbs).
Use original accessories only and replace damaged
components only with original spare parts. A device
which has been modified may be categorised into a
higher photobiological risk group.
1.6 Assambly instruc�ons
The projector must be firmly a�ached to a stable and load-
bearing surface or structure.
Local regula�ons on the safety of buildings, especially the
Ordinance on Places of Public Assembly, must be observed:
•
Building regula�ons of the federal states. Safety of
construc�on sites and buildings
•
Ordinance on Places of Public Assembly
•
Ordinance on the Construc�on and Opera�on of Spe-
cial Buildings
