Se�ngs
PHOS s pole mount pro
19
3.
Release and remove the two cylinder head screws.
4.
Rotate the stop by 180° so that the lug is on the other
side, but facing the projector head again.
5.
Fix the stop in place with the two cylinder head
screws.
5.5 Aligning the mo�f
1.
Loosen the knurled screw un�l the gobo case can be
rotated.
2.
Rotate the gobo case un�l the mo�f has been aligned
as desired.
3.
Tighten the knurled screw.
5.4 Adjus�ng the focus of the mo�f
1.
Loosen the knurled screw.
2.
Move the projec�on lens within the holder un�l the
mo�f is in focus.
3.
Tighten the knurled screw.
5.6 Removing moisture
Moisture that condenses inside the device is absorbed by
the drypacks. The silica gel in the drypacks changes colour
when it becomes saturated from white to dark grey. You
can see this colour change through a transparent strip in
the paper cover and you should replace the drypack as
necessary.
Replacing the drypack in the device stand
1.
Carefully release the drypack from the clip and replace
it with an unused one.
