Installa�on
14
Derksen Lich�echnik
4.5 Connec�ng your own supply cable
1.
Loosen the four cylinder head screws.
2.
Carefully loosen the inner protec�ve conductor cable
from the terminal in the cover and disassemble the
device cover.
3.
Loosen the two pan head screws.
4.
Disassemble the lower cover to gain access to the
connec�on terminals.
5.
Release the cable screw connec�on on the back of
the device.
WARNING! Danger of electric shock!
An electric shock can cause serious injury or death.
▶
Only remove the lower cover once the mains supply has been switched off.
ATTENTION!
Poten�al
Damage.
A ven�la�on element has been installed
next to the cable screw connec�on. This
must NOT be dismantled, rotated or
modified in any way. This is the only way to ensure its
waterproof capability.
