Moun�ng
10
Derksen Lich�echnik
11. Repeat steps 1 to 10 to fit the second mounting strap.
9.
Rotate the clamping screw by about 1½ turns antic-
lockwise until the mounting strap is tight around the
circumference of the mast and the mounting plate
holds firmly in one position.
10. Lock the clamping screw with the nut to prevent loo-
sening as a result of vibration.
9.
10.
c.
a. b.
4.2. Fi�ng the moun�ng bracket
When comple�ng the following steps, ensure that you fit
the screws, spring rings and washers in the sequence spe-
cified. Use the hexagon socket wrench supplied to do so.
1.
Slide the moun�ng bracket over the threaded pin of
the moun�ng plate.
2.
Fasten the moun�ng bracket with the self-locking
nut (a.), spring washer (b.) and washer (c.)
