5.
Use the two curved slots to align the projector a�er as-
sembly. Use the four corner holes for fixed installa�on.
6.
Connect the protec�ve conductor to the terminal.
7.
Use the three countersunk screws to a�ach the device
stand to the moun�ng plate.
Installa�on
PHOS outdoor
9
Installa�on
PHOS outdoor
9
4.2 Connec�ng to the power supply
1.
Unscrew the individual parts of the connec�ng sleeve.
2.
Remove the terminal block.
3.
Feed the projector connec�on cable and your supply
line through the components of the connec�ng sleeve
as shown.
WARNING! Danger of electric shock!
An electric shock can cause serious injury or death.
▶
Only allow a qualified electrician to carry out electrical connec�ons.
