Se�ngs
12
Derksen Lich�echnik
3.
Unscrew the gobo case halves.
4.
Insert the gobo into the case with the mo�f back-to-
front. The front side must face the light source.
(Note: Touch only the edges of the gobo when inser-
�ng it into the case.)
5.
Ensure that the gobo is placed flat in the case.
6.
Screw the gobo case halves together. Carefully press
against the gobo so that it is firmly and securely posi�-
oned in the case.
7.
Insert the gobo case into the projector head.
8.
Tighten the knurled screw.
A. Front side: The coated side of the gobo. The front
side faces the light source.
B. Dark side: The dark part of the coa�ng can be seen
through the glass. The dark side faces the projec�on
lens.
WARNING! Risk of burns!
You can burn yourself on projector parts which have become hot.
▶
Let the device cool for at least 10 minutes before any set-up work.
WARNING! Op�cal radia�on hazard!
Op�cal radia�on can cause temporary or permanent eye damage.
▶
Never stare directly into the beam of light.
