DEPURECO ATEX PUMA 10 Z21, Инструкция по эксплуатации и техническому обслуживанию

Страница: 34 / 48

Page 34 of 48
5. MAINTENANCE SECTION
Warning!
Special vacuum maintenance must be carried out solely by
specialised technicians authorised by the DEPURECO dealer.
5.1 Informative notes
This section describes the checks and routine maintenance operations
required to ensure proper vacuum operation.
Maximum reliability and minimum maintenance costs are the result of a
planned maintenance and inspection schedule carefully followed throughout
the entire lifespan of the vacuum.
Observe the set maintenance intervals and schedule the interventions
according to specific requirements in relation with the vacuum production
cycle.
Always use perfectly working tools specifically intended for the operation
to be carried out; the use of inadequate or inefficient tools can cause
severe damages.
Any other intervention required to remove faults or malfunctions must be
expressly authorised by the manufacturer.
In these cases, always communicate the vacuum identification data - see
para. 1.4 of this manual.
For significant repairs, refer to the authorised dealer, whose specialised
personnel has the technological expertise and is always available for
prompt interventions.
For user maintenance operations, the vacuum must be disassembled, cleaned
and maintained, where possible, in such a way as to prevent hazards to the
maintenance personnel and to third parties. Suitable precautionary
measures include decontamination before dismantling, measures for filtered
forced ventilation of the room where the appliance is disassembled,
cleaning of the maintenance area and suitable personal protection
equipment.
Once every three months (or more frequently, according to the operating
cycle and the conditions of use), the manufacturer or a qualified
technician must check the filters, ensuring that they are not damaged; the
tightness of the air system and proper operation of the control devices.
Should maintenance operations or repairs be carried out, all contaminated
objects must be adequately cleaned, placed in waterproof bags and disposed
of in compliance with the regulations in force.