DEPURECO ATEX PUMA 10 Z21, Инструкция по эксплуатации и техническому обслуживанию

Страница: 27 / 48

Page 27 of 48
Note: the flexible tube and the relevant end-pieces and accessories are not
included with the STANDARD model. Contact your dealer (or DEPURECO) for
information regarding the various types of OPTIONALS that can be used on
this specific model.
The following operation must be carried out by a qualified electrician.
Ensure that the power supply line corresponds to the voltage and frequency
indicated on the identification plate and that it is efficiently earthed.
The vacuum cleaner’s electrical current supply socket must be protected by a
CE-marked circuit breaker. Insert the plug (standard supply) into the
socket.
Warning!
Do not insert the plug in the power supply socket with wet
hands.
Do not use extension leads.
Connection to air supply (only for those
vacuums wiht reverse jet cleaning system)
A
Ensure that air hoses are correctly
installed on the control box
B
Connect the air supply from box and
from the regulating filter to the
fittings on the cap
C
ensure the air hoses are correctly
connected to the regulating filter
D
Connect the air hoses (four ø6 mm
hoses)placed on the cartridges and to
the tank(one ø8mm hose)
A
B
C D