DEPURECO ATEX PUMA 10 Z21, Инструкция по эксплуатации и техническому обслуживанию

Страница: 35 / 48

Page 35 of 48
5.2 General safety regulations
Warning!
All the operations described above must be carried out with the
plug disconnected from the socket.
Before starting any maintenance or cleaning operation, wear
suitable PPE (protective clothing, goggles and/or gloves, etc.)
according to the work to be done.
Place a sign on the vacuum with the message:
“MACHINE UNDER MAINTENANCE
DO NOT START”
Before returning to use, the whole system must be checked
according starting procedures.
Run a few trial operating cycles after every maintenance
operation to ensure proper machine operation.
Failure to observe these precautions can cause serious injury to
personnel.
Maintenance operations must be carried out by trained technicians
specialised in the following sectors:
• Mechanical maintenance
• Electrical maintenance
It is the Safety Manager's duty to ensure the professionalism and skills
of these technicians.
Before starting any maintenance operation, the Safety Manager must :
- Keep unauthorised personnel out of the work area.

Ensure that the necessary tools are in good
conditions and readily available to the maintenance
technician.

Ensure that the maintenance technician is equipped
with the personal protective equipment required for
the specific operation (gloves, goggles, shoes,
mask, etc.).

Make sure the maintenance technician has read
- Ensure that there is enough light and, if necessary, provide 24 Volt
torches.
- Ensure that the necessary tools are in good
conditions and readily available to the
maintenance technician.
- Ensure the maintenance technician is equipped
with the personal protection equipment
required for the specific operation (gloves,
goggles, shoes, mask, etc.)
- Make sure the maintenance technician has
carefully read the instructions contained in
this manual and has perfectly acquired
knowledge on the operation of the vacuum and
its components.