Deprag 346-138U, Руководство по эксплуатации

Страница: 7 / 40

7
Maintenance and repair on hydraulic and pneumatic equipment
may only be performed by specially trained personnel!
Disconnect equipment from air supply, prior to repair of
pneumatic or hydraulic equipment.
Provide regular preventive maintenance on hoses and airlines.
Exchange hose lines, even if there is no visible damage!
(Observe corresponding requirements of the manufacturer!)
After repair and maintenance, check the following items:
·
make sure all detached and re-attached connections are
solid.
·
confirm that removed covers, screens or filters were re-
installed
·
During disconnecting or reconnecting of an air-operated
equipment, injury may occur due to a whipping air-hose
After conclusion of maintenance or repair and prior to start of
operation, make sure to
·
remove all materials, tools and other supplies needed for the
maintenance or repair from work area of the equipment
·
remove leaking liquid or oils
·
make sure all safety devices on the equipment work perfectly!
1.7 Observe Environmental Regulations
When working on or with the equipment, it is imperative to
observe all requirements in regards to waste-disposal and
proper recycling.
Especially during installation, repair or maintenance, water
damaging agents such as
·
lubricating grease and oil
·
hydraulic fluid
·
cooling agents
·
solvent-containing cleaning agents
must not leak into the ground or into the sewage system!
Such materials must be stored, transported, contained and
recycled in suitable containers.