Deprag 346-138U, Руководство по эксплуатации

Страница: 29 / 40

29
7 Maintenance and Upkeep
Testing and maintenance can be provided by Operator, disassembly and re-
assembly of the DEPRAG Screwdriver Spindle should be done by
experienced maintenance personnel. Incorrect assembly or disassembly can
lead to injury of an operator and damage of the tool.
The tool requires little maintenance. If the following service rules are
observed, the tool will have a long life expectancy and will remain in a safe
condition.
·
Check tool on a regular basis for external damage.
·
Check your maintenance unit on a regular basis, make sure that sufficient
oil is in the lubricator (if lubrication is used) and that the adjustment is
correct. We recommend for your lubricator DEPRAGOL, part 790081 E.
·
After cleaning, the gearing parts have to be greased prior to re-assembly,
preferably with Grease, part 807293.
·
After assembly fill 2 – 3 drops of DEPRAGOL into the air inlet nipple.
·
If tool are being used with lubrication, we recommend to have tools tested
and cleaned every 12 months (single shift).
·
If tools are being used without lubrication, we recommend to have tools
tested and cleaned every 6 months (single shift).
·
Exchange broken or worn inserting tools immediately, for they can cause
injury to the Operator.
·
If tool malfunctions, we recommend to send the machine to DEPRAG.
7.1 Wear Parts
Q
UANTITY
N
AME
P
ART
N
O
.
2 Silencer 328233
5 Vane 3269533